Recording/Playback On A Sequenced 0.0; M Connecting A Sequencer; M How To Set The Rd-500 - Roland RD-500 Owner's Manual

S{=Yoxo) (o ale yA (eh'4 ele (e1,@e) ame m-y=10 Ul) alex=)
The following explains how to connect a MIDI sequencer to the RD-500 and record/playback your
performances.
@ Connecting a Sequencer
Connect the MIDI OUT on the RD-500 to the MIDI IN on the sequencer. Then connect the MIDI IN
on the RD-500 to the MIDI OUT on the sequencer. Turn the sequencer's 'Soft Thru' function on.
You can record the data while actually listening to the sound.
* Refer to your sequencer's owner's manual for information on setting the Soft Thru function and
on recording/playback.
@ How to set the RD-500
Press the LOWER or UPPER button (the indictor will light), then select the Part to record.
GRAND 1 GARAND 2 EGRAND MKS-20
cat ss ese alt
KEY TOUCH INDICATOR. | "LOCAL
_ BHOOES EFANO SRASS oncaN
Sl eel Dl
O. SERSETIVITY BEND DOWN SEND UP
FUNG TRANSPOSE EC. SING H- STRINGS . BASS PERCUSSION
TUNE g e ) YES JNO. TACK, 'DECAY RELEASE
ghia : SOUNDS
TUINT LEVEL HE
LOWER UPPER - INT.
aes
Bl Fl
CONTROL TRANSPOSE
25 LOWER: UPPER
Ju =f hy :
Off
Now, set the RX Channel and Local Switch in the Function mode.
33