Using Fm Radio - Creative Zen Vision Cell Phone User Manual

Using FM Radio

Listening to the radio
1
Make sure your earphones are connected to your player when scanning for radio stations.
The earphone cable acts as an antenna for radio reception.
2
In the main menu, Select FM Radio.
3
To automatically scan and save radio stations, press the Options
Autoscan.
The player scans for all radio stations with clear reception. At the end of the autoscan, Zen
Vision automatically saves all stations as preset channels and tunes in to the first preset.
4
Use the Up or Down
TIP If you are using the Zen Vision wired remote control, you can press the MODE button
to switch between the Now Playing and FM Radio screens.
Manually tuning or scanning for a radio station
1
Press the Left or Right
manually scan for a radio station.
2
Hold down the Left
available radio station.
3
To save a radio station as a preset, press the Options
You can also press and hold the OK button until the Save as Preset screen appears.
4
Select a preset number.
navigation buttons to select a different preset.
navigation button to fine tune the radio frequency or
or Right navigation button for one second to scan for the next
Transferring and Managing Content
button and select
button, select Save as Preset.
41