Technics SU-A700 Operating Instructions Manual page 6

CONNECTIONS cennns
One pair of speakers can be connected to the "A" terminals of
this unit and one palr to the "B" terminals, or only one pair of bi-
wired speakers can be connected to all terminals.
To connect main and/or second speakers
Main (A) speakers
(not included)
(right)
(right)
Second (B) speakers
(not included)
W Load Impedance
«When only the "A" or only the "B" terminals are used: 4—16
ohms
¢When both the "A" and the "B" terminals are used
simultaneously: 8— 16 ohms
To. connect bi-wired speakers (not included)
(left)
Note: Connect only bi-wired speakers in this way.
@ Load impedance
When bi-wired speakers are used: 4—16 ohms
Bi BI-wiring
The treble range and the bass range of the speakers are con-
hected to the speaker terminals of the amplifier by using two
speaker connection cords separately for each.
As a result of making connections in this way, sound can be
reproduced with much greater nuance and detail, with the feel-
Ings of alr oscillation and deepness of sound provided by an input
source that suppresses reciprocal band-range interference.
(Refer to the operating instructions of the speakers.)
To connect cords to terminals
® Strip off the outer ®
covering, and twist the
—
i). ——S—
center conductor.
@® Turn completely to the
left.
© Insert the wire and turn completely to the right. Pull the
cord to assure a proper connection.
Note: Be sure to only connect positive (+) cords to
positive (+) terminals, and negative (—) cords to
negative {—) terminals.
Note:
To prevent damage to circultry, never
short-circult the positive (+) and negative
(—) speaker wires.
For United Kingdom only oe
When using banana plugs
Use with the speaker terminal GH. S
knob tightened completely. 6
I wee plug
(not included)
To connect the AC power supply cord
{Inctuded)
FOR UNITED KINGDOM ONLY
BE SURE TO READ THE CAUTION FOR THE
AC POWER SUPPLY CORD ON PAGE 3
BEFORE CONNECTING THE AC POWER
SUPPLY CORD.
Connect the AC power supply cord (included) after all other
cables and cords are connected.
AC power supply cord
{included)
Household
AC outlet
{For areas except Australia and N.Z)
insertion of Connector
Even when the connector is perfectly
inserted, depending on the type of in- Connector
let used, the front part of the connec-
tor may jut out as shown in the draw-
ing.
However there Is no problem using the
unit.
Note:
The configuration of the AC power supply cord differs according
to area.
Not supplied for United Kingdom, Europe,.
Australia and N.Z.
it the power plug will not fit your socket, use the power plug
adaptor (included).
@(E-ET
Approx. émmSS>
Appliance iniet