Miele G 595 SC Operating Instructions Manual page 32

Cleaning and Care
Cleaning the filter in the water inlet.
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient
water flows into the wash cabinet
Wan
The plastic housing of the water
'connection hose contains an elec-
trical component.
lt must not be submerged in
water.
To clean the filter.
€ Switch off the dishwasher.
e Turn off the water inlet tap and
unscrew the inlet hose.
© Carefully remove the rubber seal.
0 Remove the filter, using pointed
pliers and clean
8 Replace filter and seal. Make sure
they are sitting correctly.
32
© Screw back into the water inlet,
taking care that it goes back on
straight.
@ Turn on the water inlet tap gra-
dually to test for leaks. If here is a
leak, screw the connections on
more tightly
Fitting an in-line water filter
If the water contains a large number
of insoluble substances, we recom-
'mend fitting a filter in the connection
between the water inlet tap and the
water inlet hose. These filters can be
obtained from the Miele Spare Parts
Department (Part no. 75577).
Cleaning
6 The control panel should only be
wiped with a damp cloth.
Do not use a scouring agent.
© The front of the dishwasher should
be cleaned with a product suitable
for the type of front fitted.
Fronts made of wood should only
be rubbed down with a damp cloth
and dried.
Do not use any cleaning agent
Containing ammonia or thinners!