Toro Haven 20459 Operator's Manual page 56

The charging station has no power.
There is no power at the house outlet.
The power supply is not plugged into the
house outlet.
The connection between the power supply
and the charging station is not connected.
A caster wheel is not functioning properly.
The caster wheel is not pivoting or rolling.
The caster wheel bearing is damaged.
The mower is not cutting evenly.
The cutting blades are dull.
There is no Bluetooth® connection between the mower
and phone.
The Bluetooth function on your phone is
turned off.
Your phone is not connected to the mower.
Troubleshooting: Preparing for Off-Season Storage
Possible Cause
Possible Cause
Possible Cause
Possible Cause
Reset the house breaker. The LED light on
the charging station will illuminate when
power is restored.
Plug the power supply into the house outlet.
The LED light on the charging station will
illuminate when power is restored.
Connect the power supply to the charging
station. The LED light on the charging
station will illuminate when power is
restored.
Clean the caster wheel and metal pivot.
Inspect the bearings for wear and ensure
that they rotate freely. Replace the bearing,
if needed.
Replace the 4 cutting blades.
Turn on the Bluetooth function on your
phone.
1. Open the settings on your phone.
2. Refresh the connected devices list on
your phone and ensure that your phone
is connected to the hub/mower.
3. If your phone is not connected to the
hub/mower, pair your phone with the
hub/mower.
Page 8–2
Corrective Action
Corrective Action
Corrective Action
Corrective Action
3448-238 B