Table of Contents
Advertisement
Introduction
The WAP-200A Wireless AP/Bridge is an 802.11g high-gain, wireless AP that supports high-speed
wireless networking at home, at work or in public places.
The 802.11g standard is backwards compatible with 802.11b products. This means that you do not
need to change your entire network to maintain connectivity. You may sacrifice some of 802.11g's
speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate
when you incorporate the 802.11g standard into your 802.11b network. You may choose to slowly
change your network by gradually replacing the 802.11b devices with 802.11g devices.
Hardware Overview
At Real Panel
DC-IN
The DC power input connector is a single jack socket to supply power to the WAP-200A.
Please use the Power Adapter provided on the WAP-200A package.
Auto MDI/MDIX LAN Ports
This port automatically senses the cable type when connecting to Router.
Reset Button
Pressing the reset button restores the AP to its original factory default settings.
LEDs
PWR
ON:
Power ON
OFF:
Power OFF
SYS
9
Advertisement
Table of Contents
