To Access The Basic Settings; Care And Cleaning; Hob - Siemens EH6 MD2 Series Instruction Manual

Indicator Function
Power-Management function
™ˆ
‹ = Deactivated.*
= 1,000 W. minimum power.
‚
= 1,500 W.
‚
= 2,000 W.
ƒ
etc.
or . = maximum power of the hob.
Š Š
Hotplate time selection
™Š
Unlimited: the last hotplate programmed remains selected.*
‹
‚ Limited: The hotplate will only remain selected for 10 seconds.
™‹ Return to basic settings
‹ Personal settings.*
Return to factory settings.
‚
*Factory settings

To access the basic settings

The hob must be turned off.
Turn on the hob with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
is displayed on the left of the screen and
™‚
Press the symbol several times until the indicator for the
0
3.
desired function appears on the left of the screen.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■
14
0 symbol and hold for
on the right.
‹
Then select the required setting using the programming zone.
4.
Press the symbol again and hold for more than 4
0
5.
seconds.
The settings will have been correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.