Table earlier in this manual. The address will be in the following format: xx-xx-xx-xx-xx-xx.
Within MeshManager's Device Manager screen, right-click on the appropriate MWR or IAP device in
3
the Device Tree and select the Ping Device option.
4
Check for a successful response to the Ping command in the Named Device results dialog box. A
successful response to the ping commands verifies connectivity to the device (MWR or IAP).
5
Repeat steps 1-4 for additional MWR or IAP devices.
May 2007
MOTOMESH DUO 4300 Users Guide
2-9