Table of Contents
Advertisement
WINDOW KIT INSTALLATION
PORTABLE AIR CONDITIONER
The window venting kit must be installed in order for the unit to work correctly. The window venting kit has been de-
signed to fit into most vertical and horizontal window openings and sliding glass doors up to 5 feet.. *The window kit
included with your purchase may vary slightly from what is shown below.
5. Attach the Window Kit Adapter to the opening in
the Window Panel. Then, attach the Screw to se-
cure the Window Kit Adapter to the Window Panel.
5
1. Open the window or door to adjust the length of the Window
Kit Panels to fit the opening. If necessary, mark the kit and cut
one end down to properly fit the opening.
3. Push in the Exhaust Hose Connector over the discharge open-
ing on the back of the unit and extend the Exhaust Hose. (Keep
the exhaust hose as short and straight as possible)
4. Twist the Window Kit Adapter onto the Exhaust Hose. (Keep
the exhaust hose as short and straight as possible)
Screw
2. Twist the Exhaust Hose Connector
onto Exhaust Hose.
4
Advertisement
Table of Contents
