Technical Specifications - Crate LIMO TX50DE Driver Manual

C R A T E

TECHNICAL SPECIFICATIONS

OUTPUT POWER RATING
INPUT IMPEDANCE
MAXIMUM SIGNAL ACCEPTED
Mic Low Z
Instrument
GAIN
Instrument
SENSITIVITY
Instrument
Line In Insert
EQS, MIC
EQS, INSTRUMENT
INSERT JACK
SPEAKERS
POWER REQUIREMENTS
SIZE AND WEIGHT
enclosed in a rugged, molded high tech polymer cabinet. Wipe
The TX50DE is
the enclosure with a damp, lint-free cloth to remove dirt and road film. Never
spray cleaning agents directly onto the enclosure, and stay away from abra-
sive cleansers which could damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
©2001 SLM Electronics • A division of St. Louis Music
50W RMS @ 10% THD, 4 ohms, 13.6VDC in
1M ohm
2V peak to peak
Mic Hi Z 12V peak to peak
12V peak to peak
Mic 57dB High Z, 72dB Low Z
44dB w/Gain switch out, Ch2
85dB w/Gain switch in, Ch1
Mic 3.5mV RMS High Z, 20mV RMS Low Z
80mV RMS w/Gain switch out, Ch2
.8mV RMS w/Gain switch in, Ch1
400mV RMS
Low ±15dB @ 60Hz
Mid ±15dB @ 600Hz
High ±15dB @ 10kHz
Low 12.5dB range @ 80Hz
Mid 18dB range @ 800Hz
High 18dB range @ 10kHz
Shape Crate proprietary circuit
Tip Line In
Ring Line Out
Sleeve Ground
Woofer Crate Custom Design 10", 4 ohm, 100 watt
1.5" voice coil, 16 oz magnet
Tweeter 2" Piezo , 4 ohm, 150 watt network
Internal 12 volt DC power supply
DC adapter for use with 120VAC
Optional 12V vehicle lighter adapter
18-1/2"W x 13-1/2"H x 12-1/2"D; 22 lbs.
www.crateamps.com
1400 Ferguson Avenue • St. Louis, MO 63133
P/N 47-099-02 • 08/01