Special Installation Functions; Automatic Tv Channel Search; Searching For New Tv Channels - Philips 14PV217 Manual

Special installation functions

You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.

Automatic TV channel search

Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a
Press the button on the remote control. The main
MENU
menu will appear.
b
Select the line '
Installation
AP q button and confirm with the
c
Select the line '
Autoinstall
button.
AP q
d
Press the SqC button. The 'Automatic TV channel
search' starts.
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
e
When the TV channel search is complete,
'
Installation comp.
screen.
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.
D If you have programmed a recording (TIMER), a wake-up
timer or a sleep-timer, you can't select the function
' '.
Autoinstall
' with the BP r or
SqC button.
' with the or
BP r
' will appear on the
D Automatic Channel Installation:
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with 'ACI'.
Information about the installation offered and how to
select it, will appear on the screen.
This set will recognize and install TV channels with 'ACI'
automatically.
TV channels will be stored from programme number 1
onward.
If 'ACI' cannot identify a TV channel, you can search for it
using the method as described in the section 'Manual TV
Channel Search'.

Searching for new TV channels

a
Press . The main menu will appear.
MENU
b
Select the line '
Installation
AP q button and confirm with the
c
Select the line '
Add new channels
BP r or AP q button and confirm with the
SqC button.
Channel search will start.
d
To store the TV channel, press
e d
Repeat step , until you have found all desired TV
channels.
D If you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you cannot select
the function '
Add new channels
' with the BP r or
SqC button.
' with the
.
OK
'.
7