Husqvarna 525iHE3 Operator's Manual page 16

Maintenance
Make sure that the position lock of the cutting deck is not damaged and operates
correctly.
Make sure that the screws that hold the cutter blades together are correctly
tightened.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note:
Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
To lubricate the bevel gear and
gearbox
WARNING:
the product become cool before you touch
the bevel gear and gearbox.
Note:
New products are first filled with grease after
approximately 20 hours of operation.
• Use Husqvarna special grease. Speak to your
servicing dealer for more information.
16
To prevent burn injuries, let
• Add the grease through the grease nipple.
CAUTION:
To examine the blades
1. Remove the screw from the gearbox.
Before
Weekly Monthly
use
X
X
Do not fill the gearbox fully.
2130 - 002 - 24.11.2023
X