Table of Contents
Advertisement
Optera™ Operations Manual
Configuring Handlers
Event handlers are the actions that your camera takes when an event source occurs. The availability of
handlers might change based on your camera model.
Configuring an Event Handler: Send Email
The Send Email event handler sends an email from your camera when a source event is triggered.
Note: You must have provided your camera with the address of an SMTP mail server on the
>
General Settings
1. Go to
Events
> Handlers.
2. Click New or select the handler you want to reconfigure.
3. Provide a name, between 2 and 23 alphanumeric characters, for the event handler in the
4. Select the
Send Email
5. Provide the necessary information for your email in the To, From, Subject, and
6. (Optional) Select the
the email.
7. (Optional) Select the
the event. For example, select this box if the event is triggered by an alarm and you want to receive
data about the state, time, or type of alarm.
8. (Optional) Set time filters to determine the days and times during which the handler will be active. If
you do not select any filters, the handler will remain active at all times. All time values must be
formatted in 24-hour notation.
9. (Optional) If available, select the source(s) that you want to trigger this event handler. Sources are
configured from the
Sources page.
10. Click Submit.Click Save.
Configuring an Event Handler: Write JPEG to SD Card
This event handler captures and saves a JPEG to a micro SD card when an event source is
triggered.JPEG files are named according to the date and time at which they are recorded; although, you
can determine the order of factors in the date-and-time filename.
Note: Do not use the "Write JPEG to SD Card" handler if you enabled local storage through the
ONVIF API.Writing JPEGs to the micro SD card disables local storage.
1. Install a micro SD card in the slot located on the back of the camera.
Note: The micro SD card must be formatted as FAT32 or reformatted to est4.
2. Select
Handlers
3. Click
New Handler
4. Provide a name, between 2 and 23 alphanumeric characters, for the event handler in the
5. Select the
Write JPEG to SD Card
6. Select a time standard from the
given file names corresponding to the date and time of the event.
C2284M
|
08/20
page for your camera to send email notification for events.
handler Type.
JPEG Snapshot
box if you want to send a JPEG snapshot as an attachment to
Attach Raw Event Data
Events
menu Sources page. Sources are configured from the Events menu
from the
Events
menu.
or select the handler you want to reconfigure.
handler type.
File Name
box if you want the email to include extra data about
menu. The JPEG files saved to the micro SD card will be
System
Name
box.
Message
boxes.
Name
box.
31
Advertisement
Table of Contents
