Advertisement
Dear Customer,
Thank you for choosing the TAKSTAR HM-200W Wireless Headworn
Microphone - LED Display Version. To ensure proper usage of your new
device, we recommend reading this user manual thoroughly, and
keeping it for future reference. If you have any questions or feedback,
please contact our local after-sales service.
Features
UHF technology with low power consumption and high anti-interference
•
capability allows for a use distance of up to 40m.
• Adjustable frequency enables you to use up to 40 units simultaneously
without crosstalk or interference.
• Condenser microphone with high sensitivity and clear vocal reproduction.
• Built-in Li-ion battery provides up to 6 hours of continuous operation.
Function Instructions
③
④
⑤
②
①
⑥
Headworn microphone
① Power Switch: Push the switch to the "ON" position to turn on the mic.
The blue LED indicator (⑥) will light up. Push the switch to the "OFF"
position to turn off the mic. The blue LED indicator (⑥) will turn off.
② Charging Port: Connect one end of the Type-C charging cable to this
port and the other end to a USB output charger to charge the mic. The
charging LED indicator will light up red.
③ Channel Switching Button: Press the button briefly to enter channel
switching mode. Press and hold the button to enter matching mode.
④ Volume + Button: Press the button briefly to increase the volume level.
⑤ Volume - Button: Press the button briefly to decrease the volume level.
⑥ Indicator: The blue LED indicator (⑥) pulses slowly during pairing,
remains solid blue during operation, flashes rapidly if low power, turns
solid red while charging, and turns off when fully charged.
⑦ Display Screen: The display screen shows the working channel, mic
volume, and power mode.
⑧ Working Channel/Mic Volume: The current working channel is
displayed by default, with a total of 40 working channels numbered
"01-40". When you press the volume + and - buttons, the mic volume is
displayed and returns to the normal value after 3 seconds. There are a
total of 9 levels of volume numbered "U1-U9". The display screen will
automatically turn off after 10 seconds without any operation.
⑨ Low/High Power Switch: Press both [M] and [-] buttons to switch to low
power mode, the screen shows "E0". Press both [M] and [+] buttons to
switch to high power mode, the screen shows "E1". The use distance
is around 10m at low power or around 40m at high power.
Wireless Headworn Microphone - LED Display Version
Operating Instructions
1. Pairing: Turn on the headworn mic and wait for the channel status to
2. Frequency Adjustment: Once paired, press the channel switching button
Specifications
•
Frequency Response: 60Hz-16KHz
• Frequency Range: 630MHz-680MHz
• Operation Voltage: DC 2.5-5.5V
• Battery: Li-ion battery 400mAh
• Charging Voltage: DC 5V 200mA
• Charging Time: Approx. 2.5h
• Operation Time: 6h
• Sensitivity: -51 to -54dB
②
• Operation Range: Approx. 40m in open area
①
• Net Weight: Receiver: Approx. 22g; Headworn mic: Approx. 39g
⑥
Note: The above data are measured by Takstar laboratory which has the
final interpretation right!
Caution
To avoid electric shock, over temperature, catching fire, explosion,
Receiver
mechanical risk and hurt or property loss caused by improper use,
please read the following items carefully before operation:
1. Adjust the volume to proper level during operation. Do not operate
2. If abnormal phenomenon (smoke, abnormal smell) happens, please
3. The product and accessories should be put in dry and ventilated
4. Please abide by safety rules during operation. Do not use the product
5. Do not disassemble or repair the product by yourself to avoid hurt.
6. The applicable altitude and climate condition of this product is
Product Contents
Headworn Microphone
Receiver
Charging Cable
User Manual
Application
•
Use with amplifier or speaker in speech, teaching, tour guide, and
promoting events.
display on the screen. Press and hold the mic's [M] button for 5 seconds
until a running circle is displayed. Turn on the receiver to start the
auto-pairing process.
on the headworn mic once (the channel display will begin flashing).
Then, press the volume key [+]/[-] to change and cycle through the 40
frequency channels. The receiver will automatically match the new
frequency channel.
at high volume level to avoid hearing loss.
turn off the power switch and disconnect the power plug with power
socket, and send the product to local dealer for maintenance.
place rather than humid or dusty environment. Prevent the product
from fire, liquid, rain, water, over-colliding, throwing, vibrating, vent
hole covered to avoid function destroyed.
in the place prohibited by regulation or law to avoid accident.
If you have question or need service, please contact the local dealer.
subject to the power supply equipment.
※The product specification is subject to change without prior notice.
1 PC.
1 PC.
1 PC.
1 PC.
Advertisement
