Garmin eTrex Summit Owner's Manual And Reference Manual page 19

As mentioned earlier the eTrex Summit will assign a
numeric name at the time a waypoint is created. The
assigned name can be easily changed to something more
meaningful to help in identifying the waypoint.
To change the waypoint name:
1 On the MARK WAYPOINT page, press the UP or
DOWN Button to highlight the Waypoint Name
'001'. Press ENTER. The EDIT WAYPOINT NAME
Page appears.
2. Press ENTER. Using the UP or DOWN Button, scroll
through the letter selections. Select 'H' and press
ENTER. Repeat this process and finish the word
'HOME'.
3. Using the UP or DOWN Button, highlight the 'OK'
field and press ENTER. The MARK WAYPOINT page
appears.
4. Using the UP or DOWN Button, highlight the 'OK'
field and press ENTER. Your location, named HOME,
is now marked and stored in memory.
Now that you've marked your location, it' s time to go
for a brisk walk. Press the PAGE Button and switch to the
MAP Page
Walk in a straight line for 2-3 minutes at a fast
pace and watch the Map Page.
Your location is shown by the figure in the middle of
the screen. As you move, watch the animated figure walk,
and a line—called a "track"—appear along the path you
have just covered.
Now take a sharp right or left turn and walk at a
brisk pace for another 2-3 minutes.
UA-1005.019
Getting
Started
Edit Waypoints
Edit Waypoint Name
Map Page
17