Notes On The Administrator Password; Restrictions On Copying - Epson ES-C220 User Manual

such devices or inside a medical facility, follow the directions from authorized staff members at the
facility, and follow all posted warnings and directions on the device to avoid causing an accident.
Do not connect this product to the internet directly. Connect it to a network protected by a router or
firewall.
Parent topic:

Notes on the Administrator Password

You can set an administrator password to prevent unauthorized access or changes to general product
settings and network settings stored in the product when connecting to a network (ES-C320W/RR-
400W).
The default value of the administrator password is printed on the product's label. The label is located on
the side, the back, or the bottom, depending on the product. If there is no "Password" label attached,
enter the serial number from the label attached to the bottom of the product for the default administrator
password.
You must enter the administrator password when performing the following operations:
• Accessing the advanced settings in Web Config
• Updating your product's firmware from a computer or smart device
• Using applications that can change the product's settings
• Changing or resetting the administrator password
You can change the administrator password in Web Config. The new password must be 8 to 20
characters long and only contain single-byte alphanumeric characters and symbols.
You can restore the administrator password to the default setting by resetting the network settings.
Note: Resetting the administrator password also resets the user name.
Parent topic:
Related tasks
Changing the Administrator Password in Web Config

Restrictions on Copying

Observe the following restrictions to ensure responsible and legal use of your scanner.
Notices
Notices
248