Table of Contents
Advertisement
REAR PANEL FACILITIES
VL FM/AM ANTENNA
terminals
Use
these antenna
terminals
for reception
of normal
FM and AM
broadcasts.
* For details regarding antenna col
Better Reception' on page 40,
<2: GND terminal
Connect the turntable ground Igad to this terminal.
'4; SURROUND CENTER OUT jack
Use to connect a video adaptor component such as a video enhancer
or color corrector.
(6) VIDEO OUT jacks
Use to connect a TV set for watching program materials from a VCR
or VDP connected to this unit.
[TO MONITOR TV jacks]
Connect to monitor TV or to TV sets with video input terminals.
(TO RF MODULATOR jack}
Use to connect a conventional TV set. When performing connections,
the RF MODULATOR JA-RF5 (sold separately) is required. By connect-
ing an RF modulator, video signal can be converted to VHF signal (U.S.
channel 3 or 4), thus allowing this unit to be used to view the selected
source on a conventional television set.
NOTE
* A "conventional TV set" has an antenna input terminals only.
* Do not allow any of the cord's conductors
to protrude from the
termirials or touch any other conductors. Malfunetioning or break-
downs may occur when conductors came into contact with each
other,
Gs FRONT SPEAKERS terminalis
A: Connect to a first set of speakers.
B: Connect to a second set of speakers.
tion, see the section "Hints for
@ Front speakers impedance selector switch
Set this switch to match the impedance of your speakers.
position
position
40 TO LESS
t
A ORB:
THAN
82
od
82 OR
A + B;82 OR MORE
MORE
* When using a pair of speakers:
—
=
impedance of a speaker
|
Selector position
40 to less than 82
|
-—=
f e
sass
80 or more
*° When using two pairs of speakers:
Select 3) as the selector switch position and use speskers having im-
pedance of 8 ohms or more
NOTE:
@ AC OUTLETS
{U.S. and Canadian models)
SWITCHED TOTAL 300W MAX
UNSWITCHED 200W MAX
{Multi-voitage model)
SWITCHED TOTAL 100W MAX
UNSWITCHED
100W MAX
NOTE:
@® Audio INPUT jacks
PHONO . . . .
Connect to turntable.
Connect to compact disc player.
j j ) mark.
ponent.
NOTE:
To the CONTROL
IN jack of the Pioneer
component bearing
the sR mark.
Pioneer component
bearing the iy mark.
=e
3
g,
g
15
<ARBIN15 >
Advertisement
Table of Contents
