Pioneer S-W80S-J Service Manual page 36

SPECIFICATIONS
Cabinet .......................... Floor type with bass-reflex system
Speaker (Magnetically shielded type) ........ 16cm cone type
Power Amplifier
Continuous Power Output (RMS) ...... 80W/8Ω (30-200Hz)
Total Harmonic Distortion ............................................. 0.5%
• Above specifications are for when power supply is 230V.
Input (sensitivity at 100Hz/impedance)
SPEAKER LEVEL ................................... 1.6V+1.6V/15kΩ)
LINE LEVEL (RCA jack) ............................... 160mV/50kΩ)
Turnover Frequency ....... 50-200Hz (continuously variable)
Outline Dimensions ............ 190(W) × 420(H) × 430 (D) mm
Weight (without package) ........................................... 12.6kg
Power Requirements .......................... 220-230V ~, 50-60Hz
Power Consumption ....................................................... 70W
Power Consumption in Standby mode ............................ 1W
Accessories
Speaker cords ....................................................................... 2
RCA plug cord ....................................................................... 1
Operating instructions .......................................................... 1
Note:
Specifications and design subject to possible modification
without notice,due to improvements.
Accessories
• Speaker Cord ×2
305131 (L=3m)
• RCA Pin Cord ×1
305232 (L=3m)
(30-200Hz, 8Ω, 20W)
(both channels in-phase)
S-W80S
15