Table of Contents
Advertisement
6 CONTROLS
6.2.1 IGNITION SWITCH _________________________________________________________
The ignition switch has three positions, OFF, RUN and START. In the RUN
OFF
RUN
position, the controller program is active and input and output circuits are
monitored.
START
6.2.2 PARKING BRAKE SWITCH __________________________________________________
To engage the parking brake, press the front of the switch. Parking brake light on LDU (See
6.2.9) will turn on. Operation of the cutting units operation is disabled with the parking brake
engaged.
To disengage parking brake, press the rear part the switch. The parking brake light will turn off.
NOTE: Engine will not start with the parking brake switch in the OFF position.
6.2.3 CRUISE CONTROL SWITCH_________________________________________________
The cruise control switch controls the operation of the cruise control system.
To engage the cruise control, press the traction pedal, push the orange lock forward and press
the front of the switch.
To disengage the cruise control, press the rear part of the cruise control switch, press the rear
part of the parking brake switch or turn the ignition switch to the OFF position.
en-25
Advertisement
Table of Contents
