Power-Selection Operation - Carrier 38TVAB010-I Owner's Manual

8.5 TIMER OFF OPERATION
To set the timer OFF when the air conditioner is operating.
1. Press MENU button for enter menu setting and press TEMP. button to
select TIMER OFF.
2. Enter TIMER set by press MENU button.
triangle mark will stop blink and setting feature will be blink instead.
3. Select TIMER OFF by press TEMP. button.
Can select TIMER OFF from 0.5 - 12hrs.
4. Confirm TIMER OFF by press MENU button.
5. Leave from menu setting display by select EXIT.
Note:
● The setting will be saved for the next same operation.
Cancel TIMER OFF
6. During TIMER OFF already set (no.5) press MENU button and press
TEMP. button to select TIMER OFF.
7. Press MENU button again will cancel TIMER OFF.
8. Leave from menu setting display by select EXIT.
Blink both triangle and
feature mark Feature not
yet set
Blink only triangle
Feature already set
Blink only triangle
Feature already set
Blink both triangle and feature
mark Feature not yet set
8.6 PLASMA ION OPERATION
Capture efficiency of floating impurities in the air is accelerated by plasma ion
contaminates such as bacteria, odor, smoke, dust and virus are caught and
deactivated by Plasma Ion.
1. Press MENU button for enter menu setting and press TEMP. button to
select PURE
2. Confirm selected feature by press MENU button again.
3. Leave from menu setting display by select EXIT.
Note:
● Plasma Ion operation dose not remove harmful substances from cigarette
smoke (carbon monoxide etc.). Open a window occasionally for ventilation.

8.7 POWER-SELECTION OPERATION

This function is used when the circuit breaker is shared with other electrical
appliances. It limits the maximum current and power consumption to 100%,
75%, or 50% and can be implemented by POWER-SELECTION. The lower
percentage, the higher saving and also longer compressor lifetime.
● Due to the reason that POWER-SELECTION function limits the maximum
current, inadequate cooling capacity may occur.
1. Press MENU button for enter menu setting and press TEMP. button to
select POWER-SEL
2. Enter POWER-SEL setting by press MENU button again.
3. Select POWER-SEL level by press TEMP. button.
100% 75%
4. Confirm POWER-SEL level by press MENU button.
5. Leave from menu setting display by select EXIT.
PURE
Blink both triangle and
feature mark Feature not
yet set
Blink only triangle Feature
already set
Blink only triangle
50%
EN