Table of Contents
Advertisement
Adding and removing laundry
1. Press the "Start/Pause" button to pause the machine. The programme follow-up light of the
relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out laundry.
4. Close the loading door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the "Start/Pause" button to start the machine.
4.3.16 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be cancelled. End/Cancel light will flash continuously to notify that the
programme has been canceled.
When you turn the Programme Selection knob, the machine will end the programme but will not
discharge the water inside. When you select and start a new programme, the newly selected
programme will start depending on the step the previous programme was canceled in. For example,
the machine may take in additional water or continue to wash with the water inside.
C
Depending on the step where the programme was canceled in, you may have to add detergent and softener
again for the programme you have selected anew.
4.3.17 End of programme
At the end of the programme, "End" will be displayed.
1. Wait until the light of the loading door goes off completely.
2. Switch the programme selection knob to On/Off to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is now ready for the next washing
cycle.
4.3.18 Your machine has the "Pause Mode" function.
After using the On/Off button to switch on the machine, if you do not start any programme in the
selection step or do not perform anything else, or if you do not do anything in 10 minutes after the
selected programme has ended, the machine will automatically switch to energy saving mode. Also,
if your product has a display that shows programme time, this display will completely turn off. If
you turn the Programme Selection knob or touch any button, the lights and the display will switch
back to the previous position. The selections you make when exiting the energy efficiency mode
may change. Check if your selections are correct before starting the programme. If necessary, make
adjustments again. This is not an error.
22 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
