Table of Contents
Advertisement
Remove the odour filter.
4.
Fitting the odour filters
1.
Slide the odour filter into the extractor hood.
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
9.2 Malfunctions
Fault
The appliance is not working.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
Guide the odour filter around the motor.
2.
Carefully slide the odour filter into the holder.
3.
Install the grease filters.
4.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
9.1 Replacing defective LED lights
Defective LED lights may be replaced by the manu-
▶
facturer, their customer service or a qualified techni-
cian (electrician) only.
Troubleshooting en
9
Advertisement
Table of Contents
