Panasonic NN-A872SBBPQ Service Manual page 33

9.9. Convection Element And Circulation Fan Motor
1. Remove one screw to remove the the exhaust guide D. Figure 13.
2. Remove the rear heater cover by removing the three screws.
Figure 13
3. Remove the temperature sensor by removing the two screws.
Figure 14
4. Remove the power cord.
5. Remove the wire terminals from the circulation fan motor and the
convection heater element.
6. Remove the four screws from the oven base. Figure 15
7. Carefully place hte oven onto its base and remove the backplate.
8. Remove the nut holding the circulation fan. Figure 16
9. Remove the circulation fan by removing the three screws. Figure
16
Removing the screws holding the grill heater
Figure 12
Removing the grill element
28