After the battery pack is fully charged;
Operation
While in use (Talk mode)
While not in use (Standby mode)
When TALK/BATT LOW LED blinks, all handset buttons are disabled
and the battery needs to be charged. If you are during a call, you hear
short beeps. Finish the call as soon as possible and place the handset
on the base unit.
Note
If a call comes in when the battery is too low to operate properly, you will be unable to answer the
call or the call will be disconnected.
WALL MOUNTING
MOUNTING ON A STANDARD WALL PLATE
Raise the antenna.
Approx. battery life
Telephone
Line Cord
AC Adaptor
7
up to 6 hours
up to 10 days
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)