2. CHARGE THE BATTERY PACK
Red
Charging contacts
Note
The battery pack is not charged properly if the charging contacts are dirty or tarnished. Clean the
contacts occasionally with a dry cloth.
Note
Use only the spplied battery pack (TRB-8000; power source
Black
600 mAh, 3.6V).
q Remove the battery compartment cover
on the back of the handset by sliding it
down.
w Plug the battery pack cord into the
connector in the battery compartment in
correct polarity. It fits in only one way.
e Place the battery pack in the battery
compartment.
r Put the battery compartment cover back
by sliding until it snaps into place. Make
sure not to get the wires of the battery pack
caught in the cover.
t Place the handset on the base unit.
Be sure the IN USE/CHARGE LED lights.
If the IN USE/CHARGE LED does not
light, make sure the AC adaptor is plugged
in securely and that the electrical outlet is
working and not controlled by a light
switch.
It is important to charge the battery for
12 to 16 hours continuously without
IN USE/
any interruption before you use the
CHARGE
LED
handset for the first time.
6