Assigning Ip Address - Toshiba IK-WB70A Quick Start Manual

Assigning IP Address

1. Install the "Installation Wizard" under the Software Utility directory
from CD-ROM.
2. The program will conduct analyses on your network environment.
After your network is analyzed, please click on the "Next" button to
continue the program.
Installation
Wizard
3. The program searches for other Network Cameras on the same LAN.
4. After searching, the main installer window will pop up. Click on the
MAC that matches the one labeled on the side of the camera lens to
connect the Internet Explorer to the Network Camera.
0002D1714270
NOTE
If "Installation Wizard" does not perform normally or the camera can not be found
●
during the search even though the camera and a PC are connected correctly,
please switch off the wireless LAN of a PC.
Installation Wizard can search the location of the Network Camera even though
●
DHCP is not used on the network.
Reassign the static IP address because IP address of the Network Camera has
been set 169.254.*.* by default.
16
0002D1714270