Introduction; Applicable Models And Variants - Harman AXYS TUNNEL Intellivox ADC-V90 Installation Manual

Table of Contents

Advertisement

AXYS
Intellivox ADC Installation Manual
®

2. INTroDUcTIoN

This manual describes the recommended installation
procedure for the AXYS
ADC range of loudspeakers.
®
The ADC range are compact 100 V/70 V line units intended
for use in a wide variety of Public Address and Voice
Alarm (PA/VA) systems. They are particularly suitable for
installation in reverberant spaces such as railway and bus
stations, airports, places of worship, shopping centres, etc.,
where high quality speech reproduction is required.
The AXYS
Intellivox ADC device is a loudspeaker type
®
known as passive loudspeaker array, in which multiple
drive units are mounted in the housing at specific spacings.
In addition to the drivers, the Intellivox ADC housing
contains a set of passive filters. When properly applied, the
Intellivox ADC device is capable of achieving a constant
SPL for mid-band frequencies over the listening area,
whilst minimizing the 'spill' to other areas.
other key features include:
• Pilot tone indication
• P rotection (glass + thermal fuse and ceramic
terminal block)
• EQ correction and high-pass filter
This manual covers:
• Wiring and connection details
• Mechanical installation of the loudspeaker
Please note that a full range of optional mounting brackets
and connection coverboxes are available. Please
refer to our website for further details.
201509/ADCIM
APPlIcABlE moDElS, AND VArIANTS
The Intellivox ADC range is available in two versions:
• M odel V90 – for vertical mounting
(Part Nos. 576125, 577125 and 577135)
• M odel H90 – for horizontal mounting
(Part Nos. 576126, 577126 and 577136)
This manual is applicable to both models. However, some
factors arising from the two models' different physical
configurations result in some sections of the manual text
being strictly applicable to only the V90 or the H90. These
sections are clearly indicated.
Apart from the passive filters, the two models are both
electrically identical and can use the same mounting
brackets. However their effective areas of coverage are
very different, and the decision as to which is specified in
a particular installation will be dictated by the specifics of
the building or space.
fig.1.1 Model V90 – for vertical mounting
fig.1.2 Model H90 – for horizontal mounting
11

Advertisement

Table of Contents
loading

Table of Contents