Table of Contents
Advertisement
9.
10.
11.
After recording, slide "POWER" switch to" VCR",
and the camera/recorder will be now in the stop
mode.
Press "REW" button.
The tape will be rewound to
the beginning.
Press "PLAY"
button.
The picture you just re-
corded will be seen
through
the viewfinder and
sound can be heard by earphone (Not supplied).
NOTE: If you connect the camera/recorder to your
TV, you can see the picture played back on your
TV. Refer to "VIEWING THE PICTURE PLAYED
BACK
ON YOUR
TV" on page 22.
12. After playing, press "STOP"
button.
"POWER"
Switch
"REW"
Button
"PLAY" Button
"EJECT" switch to remove cassette.
"EJECT" Switch
"POWER" Switch
14. Always
remove
the
power
source
from
the
camera/recorder after use.
NOTE:
If you
have
a cassette
tape
that has
already been partially recorded on and you want
to
record
the
remaining
blank
section,
see
"CAMERA
SEARCH"
on page 35.
E15
Advertisement
Table of Contents
