Graco A Series Instructions-Parts List Manual page 17

AIR SOLENOID VALVE 215407
150 psi 110 bar) MAXIMUM WORKING PRESSURE
For pump air motor, 24 V, DC, 9 watts
l/2 npt(f) x l/2 npsm(f)
NOTE: This valve is normally closed.
See the illustration below for correct
plumbing.
FLUID SOLENOID VALVE and PILOT "READY"
LIGHT KIT 207-178
For converting existing overhead reels. Valve opens
and closes to control fluid flow to dispensing station
and light tells operator when order is ready to
dispense.
FLUID SOLENOID VALVE 215-487
1500 psi (703 bar) MAXIMUM WORKING PRESSURE
24 V DC, 25 watts. Same as valve in kit 207-178, ex-
cept has no "ready" light. (See Fig 1 I, page 12.)
PRE-CONNECTED ELECTRIC CABLE
90 V, 2 wire, 18 ga. (See Fig 5, page 6. )
215-480 10 ft. (3 m)
215481 100 ft. (30 m)
DELUXE OVERHEAD REELS
750 psi (51 bar) MAXIMUM WORKING PRESSURE
Includes solenoid valve and pilot "ready" light.
226-308 For ATF
226-309 For Gear Lube
226-310 For Motor Oil
DISPENSER BAR 226-307
Single tap, wall-mounted bar with solenoid valve and
pilot "ready" light.
PRESSURE RELIEF KIT 207-221
900 psi (62 bar) MAXIMUM WORKING PRESSURE
Relieves fluid line pressure when it exceeds 900 psi
(62 bar).
JUNCTION BOX ENCLOSURE 105-477
For enclosing up to 3 module junction strips. (See
front cover.)
Length: 15 in. (380 mm)
Width: 12 in. (305 mm)
Depth: 4 in. (102 mm)
SPLICE CONNECTER 105-476
To splice ready lights on reels to solenoid valves. (See
Fig 6, page 6.)
AIR CONTROL VALVE 204-886
For easy operation of on/off air pressure control.
l/4 npt
307-362 17