Set-Up Features; Set Time; Ant (Antenna); Auto Prog (Program) - Panasonic CT-20G11 Operating Instructions Manual

Set-Up Features
• Set Time
• Ant (Antenna)
• Auto Prog (Program)
• Manual Prog (Program)
• CC (Closed Caption) on Mute
• CC (Closed Caption) Mode
• English, Espanol (Spanish) or Francais (French)
Located On Remote Control
Ant (Antenna)-
The proper Input mode must be
selected for the type of signal at the antenna input..
• TV mode is used when the Receiver is not connected
to a cable TV system, for example when using a
VHF/UHF antenna (cha_nels 02- 69).
• Cable mode is used when the Receiw._ris connected
to a Cable TV system aqd you are not using a cable
company converter box (channels 01 - 125).
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOI._ LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
ACTION
Selects or Adjusts (_)
FeaturesWhen
Menu is Displayed
Selects Desired
Feature When
Menu is Displayed
Displays and Exits Menus
Set Time
- Clock (when set) will display on screen
at initial 'q-urn On", after a channel change and when
pressing the RECALL button. The time must be set first
in order to operate the Program ON/OFF Timer.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu, "SET TIME" will be highlighted.
4. Press the CH DOWN button to highlight"ANT".
5. Press the VOL LEFT or RIGHT button to select TV
or CABLE.
6. Press the ACTION bt, tton twice to exit the Set-Up
Menu.
4. Press the VOL LEFT or RIGHT button to set hours
(set AM/PM accordingly).
5. Press the CH DOWN button to select minutes
position.
6. Press the VOL LEFT or RIGHT button repeatedly to
set minutes.
7. Press the ACTION button twice to exit the Set-Up
Menu.
-18-