Storage Procedure
1.Drain the carburetor
by loosening
the drain
screw.
Drain
the
gasoline into a suitable container.
AW ARNING
Gasoline
is extremely
flammable
and
is explosive
under certain
conditions. Perform this task in a well-ventilated area with the engine
stopped. Do not smoke or allow flames or sparks in the area during
this procedure.
DRAIN SCREW
2. Change the engine ой! (Раде 30)
3.Remove
the spark plug, and
pour about
a tablespoon
of clean
engine oil into the cylinder. Crank the engine several revolutions to
distribute the oil, then reinstall the spark plug.
4.Slowly pull the starter grip until resistance 15 felt. At this point, the
piston is d
up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position
will help to protect it from internal corrosion.
Align the notch on the starter pulley
with the hole at the top of recoil starter.
36