Advertisement
BFX-220H Bass Amplifier
Technical Specifications:
Maximum Input Signal Level Accepted
Input Impedance
Signal to Noise Ratio
Output Power Rating
Gain @ 1kHz
EQ Section
Power Requirements
Size and Weight
Crate continually develops new products, as well as improves existing ones. For this reason,
Manufacturer's Name:
Production Facility:
Production Facility:
Shipping Facility:
Office Facility:
Product Type:
Complies with Standards:
LVD:
Safety:
EMC:
Supplementary information provided by your local Sales & Services Office or:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175
specifications and information in this manual are subject to change without notice.
©2001 SLM Electronics • 1400 Ferguson Avenue • St. Louis, MO 63133 U.S.A.
D
with
17 volts peak to peak (-15dB switch depressed)
500k ohms (-15dB switch out), 75k ohms (-15dB switch depressed)
75dB typical
160 watts RMS @ < 5% THD, 8 ohm load, 120VAC line
220 watts RMS @ < 5% THD, 4 ohm load, 120VAC line
67dB with EQ flat, Contour off
20dB range (±10dB) @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz, 4kHz,
8kHz and 16kHz
110-120VAC, 60 Hz250VA
110-115VAC, 50/60 Hz250VA
230VAC, 50/60 Hz250VA
7-1/8" H x 19-1/2" W x 12" D, 30 lbs
Declaration Of Conformity
#34, Effective 01-01-2001
SLM Electronics
11880 Borman Drive, St. Louis, MO 63146, USA
700 Hwy 202 W, Yellville, AR 72687, USA
1400 Ferguson Ave., St. Louis, MO 63133, USA
1400 Ferguson Ave., St. Louis, MO 63133, USA
Audio Amplifier
92/31/EEC, 93/68/EEC, & 73/23/EWG
EN60065
EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
www.crateamps.com
S
P
igital
ignal
rocessing
47-589-52 • 08/01
Advertisement
