Table of Contents
Advertisement
Basic Features
Channel Menu
Memorizing Channels
¦
MENum → Channel → ENTErE
antenna (air / Cable)
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the
TV.
✎
If the antenna is connected to
if it is connected to
aNT 2 IN
auto Program
Automatically registers available air / Cable channels to the
TV.
air: air antenna signal.
■
Cable: Cable antenna signal.
■
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If
the signal is weak or distorted, fine tune the channel manually. Scroll
to the left or right until the image
is clear.
✎
Settings are applied to the channel you're currently watching.
✎
Fine tuned channels that have been saved are marked with an
asterisk "*" on the right-hand side of the channel number in
the channel banner.
✎
To reset the fine-tuning, select reset.
Crosstalk Noise reduction(Off/On)
(analog channels only)
This function reduce diagonal noise in picture caused by the
crosstalk of signals. If your TV displays with a noise while watching
TV, turns on this function.
Color System (auto / PaL-M / PaL-N / NTSC)
Normally the TV can receive image and sound with good quality
when in the mode auto. This mode detects the signal color
system automatically. In case of some signal reception with color
unsatisfactory, select the Color System mode to auto, PaL-M,
PaL-N or NTSC.
aNT 1 IN
(aIr), select air and
(CaBLE), select Cable.
Picture Menu
Changing the Preset Picture Mode
¦
MENum → Picture → Picture Mode → ENTErE
Picture Mode
t
Select your preferred picture type.
✎
When connecting a PC, the Picture Mode is only available
the Standard and Entertain.
Dynamic: Suitable for a bright room.
■
Standard: Suitable for a normal environment.
■
Movie: Suitable for watching movies in a dark room.
■
Entertain: Suitable for watching movies and games.
■
✎
It is only available when connecting a PC.
adjusting Picture Settings
¦
MENum → Picture → ENTErE
Samsung Magicangle
Adjust screen viewing Angle to optimize screen quality according to
your viewing position.
Samsung Magicangle: When viewing the screen at an angle
■
from below or above by setting the appropriate mode for each
position you can obtain a similar picture quality as viewing the
screen directly from the front.
x
Off: Select when viewing from the front position.
x
Lean Back Mode: Select when viewing from a slightly
lower position.
x
Standing Mode: Select when viewing from the upper
position.
Mode: Adjust screen viewing angle.
■
✎
When Samsung Magicangle is set to Lean Back Mode or
Standing Mode, gamma is not available.
22
English
Advertisement
Table of Contents
