Table of Contents
Advertisement
3.
•
Position A for powder detergent (factory setting).
•
Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.8 Starting a programme
without the delay start
Press the
.
• The indicator of the
flash and stays on.
• The display updates accordingly
during the washing programme.
• The programme starts, the door
locks, the display shows the
indicator
If the indicator
door is locking. If the display
shows an alarm message after
the indicator
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
• The drain pump can operate for a
short time when the appliance fills
water.
B
stops to
.
flashes, the
has flashed for a
4.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.9 Starting a programme with
the delay start
1. Press
again and again until the
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
:
• The appliance starts the
countdown.
• The door locks, the display shows
the indicator
If the indicator
door is locking. If the display
shows an alarm message after
ENGLISH
17
.
flashes, the
Advertisement
Table of Contents
