Chapter 02
Preparations
Installation
Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― Disassembly is the reverse order of assembly.
2
3
Insert the stand base into the stand
Stand up the monitor as
in the direction of the arrow. Fasten
shown in the figure.
the screw tightly (using a screwdriver
or coin) into the bottom of the stand
base.
1
x 1
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
4
After installing the stand, place the
product upright.
Caution
Do not arbitrarily remove the panel film.
If not observed, the warranty service may
be restricted.
9