Table of Contents
Advertisement
Only use approved accessories.
For pluggable equipment, the socket-outlet shall be
installed near the equipment and shall be easily
accessible.
Don't rely on your phone as a primary device for
emergency communications.
{
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
IEEE/ANSI and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
1.6 W/kg and the highest SAR value for this device when
tested at the head was
1.277
body was
devices offer a range of functions, they can be used in other
positions, such as on the body.
As SAR is measured utilizing the device's highest transmitting
power, the actual SAR of this device while operating is
typically below that indicated above. This is due to automatic
changes to the power level of the device to ensure it only uses
the minimum power required to communicate with the
network.
* The tests are carried out in accordance with FCC 47 PART
2.1091, IEEE 1528 and ANSI/IEEE C95.1.
**
FCC ID:SRQ-ZTEF322
1.379
W/kg* with 10 mm distance. As mobile
W/kg*, and when tested at the
7
Advertisement
Table of Contents
