External Monitor - Toshiba Tecra M9 User Manual

M9
3. Close the lid and slide the lock to the lock position.
For details on inserting the Ultra Slim Bay HDD Adaptor in the computer's
Ultra Slim Bay slot, refer to Chapter 4,

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port.
3. Turn the external monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the Fn + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press Fn + F5 hot key again to
switch to the internal display).
3-30
External monitor port
Connecting the monitor cable to the external monitor port
Closing the lid
Operating Basics.
Lid
Monitor cable
User's Manual