Figure 20. Unplug the camera connector. Remove the camera from the LCD cover
Remove the hinges
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD bezel" on page 35
"Remove the LCD panel" on page 37
Step 1. Remove the screws.
a
a
a
Figure 27. Remove the hinges
Table 10. Screw specifications — removing the hinges and the WLAN antennas
Screw
Number
location
hinges to
8
LCD base
cover
Step 2. Remove the hinges.
Refer to "Appendix B. Lenovo part numbers for replacement FRUs" on page 43 to look up the Lenovo part
numbers for the replacement hinges.
b
a
a
a
a
a
a
Specifications
M2.5 × 3.5 mm, flat-head, nylon-coated
Color
Torque
Silver
3.7 — 4.0 kgf *
cm
Chapter 5. Removing a FRU or CRU
39