Product Overview - Toro Power Max Heavy Duty 1028 OXE Operator's Manual

Hide thumbs Also See for Power Max Heavy Duty 1028 OXE:

Operator's manual (32 pages)

Table Of Contents

Table of Contents

6. Squeeze the left (traction) lever to the handgrip

(Figure

19).

The machine should move forward. If the

machine does not move or moves rearward,

complete the following:

A. Release the traction lever and shut off the

engine.

B. Disconnect the trunnion from the

speed-selector lever

C. Turn the trunnion upward (counterclockwise)

on the speed-control rod

D. Connect the trunnion to the speed-selector

lever

(Figure

7. If you made any adjustments, repeat this

procedure until no adjustments are required.

Important:

If the machine moves when the

traction lever is in the released position, check the

traction cable; refer to

the Traction Cable (page 21)

to an Authorized Service Dealer for service.

(Figure

12).

(Figure

12).

Checking and Adjusting

or take the machine