Panasonic CF-50 Series Operating Instructions Manual page 28

Dealing with Problems (Summary)
When you want to
display the fonts or icons
at a larger size
When a video such as an
MPEG file and a DVD
video is being played
with WinDVD or
®
Windows Media Player,
the display destination
cannot be switched
using Fn+F3
An error occurs or the
computer freezes while
using Dualview
When the screensaver is
set, an error will occur
during a resume
operation
28
Change the size of the icons, etc. using "Icon Enlarger" (⇒Reference Manual "Icon
Enlarger").
You can also change the settings as follows (for more details, refer to the Windows
Help).
A Select [start] - [Control Panel] - [Appearance and Themes] - [Display] -
[Appearance].
B Select the font size in [Font size], and select [Effects] and then add the
check mark for [Use large icons] to increase the icon size.
C Select [OK], then select [OK].
The display destination cannot be switched while a video such as an MPEG file and
a DVD video is playing.
Stop playing the video before switching the display destination.
If you use a 3D screen saver while in Dualview mode at a high resolution, an error
may occur or the computer may freeze. Under these conditions, do not use a 3D
screen saver.
When the computer automatically enters the standby or hibernation mode while the
screensaver is running, an error may occur during a resume operation. In such
cases, turn off the screensaver or try changing the pattern of the screensaver.