Setting Up The Monitor; Installation - Philips EVNIA 32M1N5500Z User Manual

2. Setting up the monitor

2.1 Installation

Package contents
1
* Earphone-Hang
*HDMI
*Different according to region
Quick start
32M1N5500Z
Register your product and get support at www.philips.com/welcome
Power
*DP * USB A-B
Install the base
2
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of the
base.
(3) Use a screwdriver to tighten the
screw located at the bottom of the
base, and secure the base to the
stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
Caution
Place the monitor face down on a smooth
surface. Pay attention not to scrath or
damage the screen.
5