Electrical Information; Wiring Instructions - LENCO IPD-4100 Series User Manual

Ipod speaker dock with fm radio
Table of Contents

Advertisement

Make sure that other people in your household are conversant with the Speaker Dock.
Don't obstruct the ventilation vents on the Speaker Dock, for example with curtains or soft
furnishings.
Overheating will cause damage and shorten the life of the product.
Don't allow electrical equipment to be exposed to rain or moisture.

Electrical Information

This Speaker Dock is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply
sockets it must be removed and replaced with an appropriate plug. If the plug becomes damaged
and/or needs to be replaced please follow the wiring instructions below.
The plug removed must be disposed of immediately. It must not be plugged into a supply socket as
this will be an electrical hazard. If the fuse needs to be replaced it must be of the same rating and
ASTA approved to BS1362. If the plug is changed, a fuse of the appropriate rating must be fitted
in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the fuse
cover must be refitted before the appliance can be used.

Wiring Instructions

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions given
below. In both cases ensure that the outer sheath of the cable is firmly held by the cable clamp.
2-Core Plug
WARNING! Do not connect either wire to the earth terminal.
This symbol indicates that this 2-core appliance is Class II and does not require an earth
connection.
The iPod Speaker Dock is guaranteed for twelve months from the date of original purchase. If any
defect due to faulty materials or workmanship, contact the Goodmans Helpline. Have your receipt
of purchase on hand.
Page 15 of 16

Advertisement

Table of Contents
loading

Table of Contents