LENCO IPD-4100 Series User Manual page 12

Snooze mode
1.When the alarm sounds, you can press any of the buttons (except the POWER button) to activate
the snooze function.
2.'OFF' will show on the display and the alarm will turn off.
3.After approximately 6 minutes the alarm will sound again. You can activate the snooze function
again or press the POWER button to cancel the snooze function.
DON'T FORGET! This will turn off the Speaker Dock and you will need to press the POWER
button again to turn the Speaker Dock back on.
Sleep mode
The Speaker Dock can be programmed to switch off after a set time, in increments of 10 minutes,
up to 90 minutes.
1.Press the SLEEP button until the required minutes are shown.
Resetting the Speaker Dock
The Speaker Dock can be reset to return to the factory default settings.
1.Switch off the Speaker Dock and remove the plug from the wall socket.
2.To reset the Speaker Dock, remove the Backup Battery from the Memory Battery Compartment
as described in the previous sections.
3.Replace the Backup Battery after approximately 2 minutes. The Speaker Dock will be returned
to the factory default settings.
Page 12 of 16