Canon S820MG Service Manual page 89

Part 2: Troubleshooting
2.4 Troubleshooting Error Indications
1) Error indication when an error recoverable by the user occurs,
the indicator lights green, then blinks orange repeatedly.
Check the number of orange blinks and proceed to correct the error.
2) Error indication when an error not resolvable by the user occurs
The indicator toggles between orange and green repeatedly.
Check the number of toggled blinks and proceed to correct the error.
Indicator Error Status
Blink Count Code
User-Recoverable Errors
1000 Paper feed error
Orange
2 blinks
Orange 1300 Paper jam error
3 blinks
Orange 1600 No ink error*
4 blinks 1601 No ink error (Bk)
1611 No ink error (Y)
1612 No ink error (M)
1613 No ink error (C)
Download Service Manual
Table 2-1 ERROR INDICATIONS
Probable Cause and Faulty Parts
<Cause>
1. No paper was loaded.
2. During feeding, the paper did not reach the
paper-end sensor.
3. During feeding, the paper's bottom edge
missed the paper-end sensor.
4. The ASF sensor did not return to its initial
position and the paper-end sensor concluded
that there was no paper. (ASF motor may be
out of sync.)
<Suspect Parts>
Paper feed section, sheet feeder unit, paper-end
sensor, logic board
<Cause>
1. The paper-end sensor still detects the presence
of paper even after 23 inches of paper ejection
operation.
2. The ASF sensor did not return to its initial
position and the paper-end sensor concluded
that there was no paper. (Out of sync.)
3. During paper feeding abnormal timing caused
the paper-end sensor to still detect paper.
<Suspect Part>
Paper feed section, paper-end sensor, logic board
<Cause>
3
The respective ink tank has run out of ink (in
both the tank and the sponge)
<Suspect Part> Ink tank
ManualsBooks
S900/ S820/ S750/ S520