Samsung AM AN4PKH Series User Manual page 34

Installation Procedure
Setting the indoor unit addresses (MAIN/RMC/
MCU)
1 Make sure that the power is supplied to the indoor
unit.
• If the indoor unit is not plugged in, it must include a
power supply.
2 Make sure that the panel or display is connected to the
indoor unit so that it can receive options.
Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Function Page
Indication Details
Indication
and details
0
Option SEG7
Function Page
Indication Details
Indication
and details
1
34
English
Indoor unit
SEG2 SEG3
Setting main
Mode
address
Indication Details Indication
0
A
1
SEG8 SEG9
Setting RMC
-
address
Indication
0
-
1
3 Set an address (MAIN/RMC/MCU port) for each indoor
unit using the remote control, according to your air
conditioning system plan.
• The indoor unit addresses (MAIN/RMC/MCU port)
are set to 0A0000-100000-200000-300000 by
default.
NOTE
• Also set the MCU and Indoor units address by using
Add-on Change address on S-NET Pro 2.
(For more information, see the S-NET Pro 2 Help.)
• From SEG13 to SEG18 is for setting MCU address.
–
MCU-S4NEK3N, MCU-S1NEK1N
SEG4
100-digit of
an indoor unit
address
Details Indication Details
No main
address
Main
0 to 9 10-digit
address
setting
mode
SEG10
-
Details
No RMC
address
-
RMC
address
setting
mode
SEG5 SEG6
10-digit of an
The single digit
indoor unit
of an indoor unit
address
Indication Details Indication
A
0 to 9 single 0 to 3
digit
SEG11 SEG12
Group channel
Group address
(x16)
Indication Details Indication
RMC1 0 to F RMC2
Details
A single
digit
Details
0 to F