Operation Features; Operating Temperature And Humidity • Pairing An Indoor Unit With A Remote Control - Samsung AM AN4PKH Series User Manual

Operation Features

Operating temperature and humidity
When using the air conditioner follow the operating temperature and humidity ranges.
Mode Indoor temperature
Cool mode
Dry mode
Heat mode
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of
condensation and a leakage of water on the floor.
• The rated heating capacity is based on an outdoor temperature of 7°C. If the outdoor temperature
goes down below 0°C, heating efficiencies may decrease depending on the temperature
conditions.
• If the indoor unit is out of the operating temperature and humidity range, the safery device may
operate and the air conditioner may stop.
Pairing an indoor unit with a remote control
When using multiple indoor unit, you can control individually pairing remote control and indoor unit.
Set by remote control when the indoor unit is off.
Zone 1~4
NOTE
• After push the , have to push
• Each indoor unit number setting must be set by the installer when installing. Contact service
centre to reset indoor unit number.
18~32 °C
30 °C or less
within 60 seconds.
Outdoor temperature
Depending on the outdoor
unit specification
Indoor humidity
80% or less
11
English