KTM SX-E 3 2024 Owner's Manual page 83

–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly posi-
tioned in the holding spring.
M02061-01
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pres-
sure point.
–
Add brake fluid up to level
Guideline
A
Level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
H01654-10
–
Position the cover with the membrane.
–
Mount and tighten the screws.
Info
Use water to immediately clean up any brake fluid
that has overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. (
A
.
10 mm (0.39 in)
(brake fluid level
p. 105)
BRAKE SYSTEM 14
p. 46)
81