14 BRAKE SYSTEM
76
Warning
Danger of accidents Brake fluid which is too old or of the wrong type impairs the function of the brake
system.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized KTM workshop will be glad to help.)
–
Make sure that only clean, approved brake fluid from a tightly sealed container is used. (Your autho-
rized KTM workshop will be glad to help.)
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
M02057-10
M02025-13
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Check that the brake linings of the rear brake are secured.
(
p. 77)
Main work
(SX‑E 3)
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
Correct the brake fluid level.
Guideline
Brake fluid level below
reservoir rim
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane.
–
Mount and tighten the screws.
Info
Use water to immediately clean up any brake fluid
that has overflowed or spilled.
(SX‑E 5)
–
1
Remove screws
.
–
2
Take off cover
with membrane
p. 46)
3
.
4 mm (0.16 in)
p. 105)
3
.