Removing Blockages - Vax POWER 8 User Manual

U89-P8 Power 8 V1.3 28.01.13_User guide 29/01/2013 16:31 Page 9
Maintenance

Removing blockages

WARNING: To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical socket
before performing maintenance/troubleshooting checks.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
Removing blockages from the brushbar
Unscrew the five screws
on the base of unit.
Removing blockages from the TurboTool
Turn the TurboTool over and slide
off the locking ring.
vax.co.uk
All manuals and user guides at all-guides.com
(Keep your Vax as good as new)
Remove floor nozzle cover.
Locking
ring
Detach lower housing and
remove blockage.
Lift brushbar.
(some models only)
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the
groove to finish.
Remove the belt from the
end of the brushbar.
Tabs
9