Table of Contents
Advertisement
Settings
Settings
10.
Water hardness
11.
TAB
(All-in-one detergent)
12.
Auto dose
13.
Super rinse
14.
Push to open
34
Alternatives
0/1/2/3/4/5/6/7/8/9
Default: 0
On/Off
0 tsp, 3-8 tsp
On/Off
On/Off
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct.
See Water hardness in the chapter Before
washing for the first time.
For a water supply with a hardness above
5°dH (9°fH / 6°eH / 0.9 mmol/l / 5.9 gr/gal),
fill with salt.
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l / 6.0 gr/gal),
select 0. The water softener is deactivated
and no salt needs to be added.
Activate the setting when using an all-in-one
detergent containing a rinse aid. (Also
applies to dishwasher detergent gel for
automatic dosing that contains rinse aid.)
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
Activate this setting if you want to use
automatic detergent dosing.
The exact dosage depends on which
program is running. For the Auto program,
the dosage also depends on how dirty the
dishes are.
0 tsp (Off)
The Super rinse function rinses the dishes an
extra two times.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Normal
Light
Intensive
Quick pro
Sanitize
Plastic
Lower half
Upper half
The dishwasher door can be opened without
a handle.
Advertisement
Table of Contents
